We’ve evolved the bike, not the rider
Below is a sample of our labor and rates. This is meant only as a “ballpark” guess as so many bikes, manufacturers’ standards, and conditions exist out there that it’s impossible to quote without seeing a bike directly.
Bicycle Evolution: Labor Rates as of July 2022 (always check for the most current version) | |||||||
|---|---|---|---|---|---|---|---|
| ALL PARTS EXTRA - PRICES SUBJECT TO CHANGE WITHOUT NOTICE. | |||||||
| Work on tandems, recumbents, ebikesl bikes, etc. is subject to increased labor charges. | |||||||
| No labor quoted over the phone or by email. Labor quotes only valid if bike is inspected by us in person! | |||||||
| All work is guaranteed for 90 days. | We do not work on gasoline powered vehicles or bikes/parts smelling of gas. | ||||||
| There may be additional charges non-standard equipment. | Extremely dirty bikes will be assessed a $30 minimum cleaning fee. | ||||||
| Any bike left over one month without prior arraignments will be sold for charges or donated to Bike DFW | |||||||
| We may charge $5 per day storage for any bike left past one week of completion of service. | |||||||
| ALL PARTS AND ACCESSORIES PURCHASED FROM US COME WITH A ONE YEAR WARRANTY - Unless the manufactorer specifies otherwise | |||||||
| Specialty Services | Repair Standards | We can fix just about anything! | |||||
| 1 | SKU | Minute Time | Decimal Time | Labor Rate | Notes: | ||
| 3 | Hourly Shop Rate: | $99 | In 1988 the shop rate for most shops was $35 per hour, in 1998 it was $60 automotive today is $150 | ||||
| 4 | Shop Minimum | SL01 | 6 | 0.10 | $10 | ||
| Repair & Maintenance Analysis | SL02 | 12 | 0.20 | $20 | When you just want us to tell you what your bike needs and then you don't do anything with us with it | ||
| TUNE-UP | |||||||
| 12 | ULTIMATE TUNE-UP (Base Rate, see Tune-Up page for full rates) | SL10 | 120 | 2.00 | $198 | Click the TUNE-UP link for a complete description, checklist and photos | |
| 13 | BIKE CHECK | SL11 | 30 | 0.50 | $50 | Example: pre-race/ride inspection with checklist | |
| 15 | KID'S BIKE "TUNE" | SL12 | 21 | 0.35 | $35 | Adjustments & Check-over | |
| 17 | TRIAGE | SL13 | 30 | 0.50 | $50 | Minor adjustments & lubing just to get bike working. A Tune-Up is recommended! | |
| NEW BIKE BREAK-IN TUNE-UP & CHECK-OVER (3 week check) | SL14 | 18 | 0.30 | $30 | Free with Bike Purchase | ||
| OVERHAUL | |||||||
| 23 | DERAILLEUR BIKE | SL100 | 180 | 3.00 | $297 | With hand brakes, derailleurs and a freewheel type rear hub | |
| 25 | BMX BIKE (two hand brakes) | SL110 | 90 | 1.50 | $149 | ||
| 27 | BMX BIKE (rear hand brake only) | SL120 | 75 | 1.25 | $124 | ||
| INTERNAL GEARED BIKE (hand brakes) | SL130 | 150 | 2.50 | $248 | |||
| INTERNAL GEARED BIKE (coaster brake) | SL140 | 120 | 2.00 | $198 | |||
| COASTER BRAKE BIKE | SL150 | 90 | 1.50 | $149 | Without hand brakes | ||
| 31 | DRIVETRAIN CLEAN | SL160 | 51 | 0.85 | $84 | ||
| 31 | DRIVETRAIN REPLACEMENT | SL170 | 36 | 0.60 | $59 | Install new chain, gears, chainrings and derailleur pulleys | |
| 33 | UPRIGHT CONVERSION (brakes only) | SL180 | 48 | 0.80 | $79 | ||
| 34 | UPRIGHT CONVERSION (brakes and shifters) | SL190 | 75 | 1.25 | $124 | ||
| 36 | ASSEMBLY * | ||||||
| New bikes that come with accessories like fenders and racks will have additional labor added to properly install them. | |||||||
| 37 | Trail-A-Bike | SL200 | 45 | 0.75 | $74 | New-in-Box | |
| 38 | Kids Coaster Brake Bike | SL210 | 30 | 0.50 | $50 | Coaster brake ONLY ($15 extra per hand brake) | |
| 39 | Adult Coaster Brake Bike | SL220 | 51 | 0.85 | $84 | New-in-Box Only! Standard Bike Assembly Labor starts at $175. Due to the wide variation of bicycles extra labor will be added or deleted based on the components of the bike. Click the ASSEMBLY link for the details and prices. | |
| 40 | Internal Gear Bike with Coaster Brake | SL230 | 75 | 1.25 | $124 | ||
| Internal Gear Bike with 2 Hand Brakes | SL240 | 105 | 1.75 | $173 | |||
| 41 | Standard Bike (Derailleurs and Hand Brakes) | SL250 | 105 | 1.75 | $173 | ||
| Single Speed or Fixed Gear - with brakes! | SL260 | 90 | 1.50 | $149 | |||
| Track Bike - no brakes! | SL270 | 75 | 1.25 | $124 | |||
| BMX - one brake | SL280 | 75 | 1.25 | $124 | |||
| BMX - two brakes (and Gyro) | SL290 | 90 | 1.50 | $149 | |||
| Frame Up Assembly | SL300 | 210 | 3.50 | $347 | a.k.a. Pro Build hub overhaul, cleaning of used parts & wheel building extra | ||
| Strip to Bare Frame & Reassemble (or Frame Swap) | SL310 | 195 | 3.25 | $322 | example: paint job, hub overhauls extra | ||
| Disassemble to bare frame | SL320 | 21 | 0.35 | $35 | |||
| Assemble Shipped Bike | SL330 | 60 | 1.00 | $99 | Assumes bike was previously assembled, is in good shape and packed in the industry standard fashion. | ||
| Box for Shipping (cardboard box) | SL340 | 60 | 1.00 | $99 | cardboard box included (it is not recommended to ship helmets in the box) | ||
| Box for Shipping (hardcase) | SL350 | 30 | 0.50 | $50 | You bring the case | ||
| Receive and Store Shipped Bike to Our Shop | SL360 | 6 | 0.10 | $10 | Box Opened only when you arrive. | ||
| * additional labor will apply for Cargo Bikes, Tandems, Recumbents, Adult Trikes, Handcycles, etc. | |||||||
| RE-ASSEMBLY | |||||||
| 42 | Add $25 to Assembly Price from Above | (to PMBA standards) Bike must be relatively new & clean, otherwise do an Overhaul | |||||
| 86 | BIKE FITTING | ||||||
| 87 | Seat Adjustment | SL400 | 9 | 0.15 | $15 | ||
| 88 | Body Measurements Only | SL410 | 18 | 0.30 | $30 | Recommends the size bike for you. | |
| 88 | Consultation | SL420 | 36 | 0.60 | $59 | Includes You and your Bike's Measurements and Recommendations | |
| Addional Bike Fitting | SL430 | 12 | 0.20 | $20 | Measure a second bike and compare to your measurements. | ||
| 91 | Cleat Adjustment | SL440 | 45 | 0.75 | $74 | a.k.a. RAD | |
| SpinScan | SL446 | 110 | 1.83 | $182 | Computer System | ||
| 62 | BRAKES - CABLE OPERATED RIM or DRUM INTERNAL ROUTING ADDS $10.00 PER BRAKE | ||||||
| 63 | Adjust Brake | SL450 | 12 | 0.20 | $20 | ||
| 64 | Adjust Brake with cable and/or pad replacement | SL460 | 18 | 0.30 | $30 | ||
| Deglaze & Clean Drum Brakes | SL470 | 18 | 0.30 | $30 | each | ||
| Adjust BMX Brake | SL480 | 21 | 0.35 | $35 | Rotor (detangler) adds $10 | ||
| Adjust Brake with Interupter Levers | SL490 | 24 | 0.40 | $40 | |||
| 69 | Install Single Rim Brake Caliper | SL500 | 24 | 0.40 | $40 | Caliper (sidepull, centerpull, dual pivot), Cantilever, U-Brake or V-Brake | |
| 71 | BRAKES - CABLE ACTUATED MECHANICAL DISC INTERNAL ROUTING ADDS $10.00 PER BRAKE | ||||||
| 72 | Adjust Cable-Actuated Disc Brake | SL510 | 18 | 0.30 | $30 | ||
| 73 | Above with Cable/Pad/Rotor Installation | SL520 | 24 | 0.40 | $40 | ||
| 74 | Install Cable Actuated Caliper & Rotor | SL530 | 30 | 0.50 | $50 | Brake Lever $5 extra | |
| Rebuild Cable Actuated Caliper & Adjust (Avid BB7) | SL540 | 36 | 0.60 | $59 | Per Brake, Adjustment Extra | ||
| 76 | BRAKES - HYDRAULIC DISC or RIM (labor includes brake fluid) INTERNAL ROUTING ADDS $10.00 PER BRAKE | ||||||
| 77 | Bleed Brake | SK550 | 24 | 0.40 | $40 | Per Brake | |
| 78 | Shorten Line & Bleed | SL560 | 30 | 0.50 | $50 | ||
| Install New Brake Line (lengthen or replace) | SL570 | 36 | 0.60 | $59 | |||
| Install Pads | SL580 | 9 | 0.15 | $15 | |||
| 79 | Align Rotor | SL590 | 9 | 0.15 | $15 | ||
| Install Rotor | SL600 | 12 | 0.20 | $20 | |||
| 80 | Rebuild Caliper & Bleed Brake | SL610 | 42 | 0.70 | $69 | ||
| 81 | Rebuild Lever & Bleed Brake | SL620 | 42 | 0.70 | $69 | ||
| Install Single Hydraulic Disc Brake | SL630 | 39 | 0.65 | $64 | Lever, Caliper and Rotor (facing caliper mount & bleeding included) | ||
| 84 | Face Caliper Mounting Surfaces (per brake) | SL640 | 15 | 0.25 | $25 | ||
| BRAKE LEVERS | |||||||
| 66 | Install Mountain Style Brake Levers & Adjust Brakes | SL650 | 36 | 0.60 | $59 | Does NOT include re-taping; half price for single lever. | |
| 67 | Install Road Style Brake Lever & Adjust Brakes | SL660 | 45 | 0.75 | $74 | ||
| Install Cyclocross Interupter Levers | SL670 | 45 | 0.75 | $74 | |||
| 68 | Install Single Brifter (Shimano STI or Campagnolo Ergopower) | SL680 | 36 | 0.60 | $59 | Includes shifter adjustment & re-taping one side of handlebar. | |
| 113 | CRANK & BOTTOM BRACKET | ||||||
| 114 | Replace Chainring | SL700 | 12 | 0.20 | $20 | ||
| 115 | Replace Right Arm | SL710 | 21 | 0.35 | $35 | ||
| 116 | Replace Left Arm | SL720 | 9 | 0.15 | $15 | ||
| 117 | Replace Cotter Pin | SL730 | 9 | 0.15 | $15 | each | |
| 118 | Align Chainring | SL740 | 6 | 0.10 | $10 | minimum | |
| 119 | Chase Pedal Threads | SL750 | 12 | 0.20 | $20 | each | |
| 120 | Re-coil Pedal Threads | SL760 | 15 | 0.25 | $25 | each; plus insert | |
| 121 | Adjust Bottom Bracket | SL770 | 15 | 0.25 | $25 | $10 if crank arms do not need to be removed | |
| 122 | Overhaul Cup-and-Cone Bottom Bracket | SL780 | 24 | 0.40 | $40 | ||
| 123 | Adjust One Piece Crank Bottom Bracket | SL790 | 6 | 0.10 | $10 | ||
| 124 | Overhaul One Piece Crank Bottom Bracket | SL800 | 18 | 0.30 | $30 | ||
| Install External Bearing Bottom Bracket & Crank | SL810 | 24 | 0.40 | $40 | X-Type, Shimano Hollow Tech II, etc. | ||
| Overhaul External Bearing Bottom Bracket | SL820 | 36 | 0.60 | $59 | |||
| 125 | Replace Cartridge-Type Bottom Bracket | SL830 | 15 | 0.25 | $25 | ||
| 126 | Service Press-in Bottom Brackets | SL840 | 30 | 0.50 | $50 | Merlin, Gary Fisher, Klein and Fat Chance, BB-30, etc. | |
| Install Bottom Bracket in Bare Frame | SL850 | 12 | 0.20 | $20 | Any type without crank | ||
| 131 | CHAIN & REAR GEARS | ||||||
| 132 | Oil Chain(s) | SL860 | 3 | 0.05 | $5 | FREE with lube purchase | |
| 133 | Install Chain | SL870 | 6 | 0.10 | $10 | Tandem timing chain installation is $25 | |
| 134 | Clean Chain | SL880 | 12 | 0.20 | $20 | Remove, clean in parts washer, re-lube with Boesield and reinstall | |
| 135 | Remove / Replace Freewheel or Cassette Cogs | SL890 | 9 | 0.15 | $15 | ||
| 136 | Clean & Lube Freewheel | SL900 | 15 | 0.25 | $25 | Remove & clean in parts washer | |
| 137 | Remove Freehub and Oil Freewheel Mechanism | SL910 | 15 | 0.25 | $25 | ||
| 138 | Clean Cassette | SL920 | 6 | 0.10 | $10 | Remove & clean in parts washer | |
| 139 | Overhaul Freewheel | SL930 | 30 | 0.50 | $50 | ||
| 94 | DERAILLEURS & SHIFTERS & INTERNAL GEAR ADJUSTMENT | ||||||
| 95 | Adjust Derailleur | SL1000 | 12 | 0.20 | $20 | Front or Rear | |
| 96 | Adjust Derailleur with cable replacement | SL1010 | 18 | 0.30 | $30 | ||
| 97 | Internal Hub Gear Adjustment | SL1020 | 15 | 0.25 | $25 | ||
| 98 | Internal Hub with cable replacement | SL1030 | 24 | 0.40 | $40 | Customized Cable Parts/Labor Cost Extra = $15 | |
| 99 | Derailleur Installation | SL1040 | 27 | 0.45 | $45 | Front or Rear | |
| 100 | Helicoil Rear Derailleur Hanger Hole | SL1050 | 24 | 0.40 | $40 | Includes Alignment | |
| 102 | Shiftlever Installation: | ||||||
| 103 | >>>Down Tube (pair) | SL1060 | 30 | 0.50 | $50 | Pair | |
| 104 | >>>MTB (each) | SL1070 | 21 | 0.35 | $35 | Per side, any type | |
| 105 | >>>Bar Cons (pair) | SL1080 | 48 | 0.80 | $79 | Does NOT include re-taping | |
| 106 | >>>STI/Ergo Lever (a.k.a. "Brifter") (each) | SL1090 | 36 | 0.60 | $59 | Includes brake adjustment | |
| 108 | Campagnolo ErgoPower Rebuild (off bike) | SL1100 | 45 | 0.75 | $74 | ||
| 109 | Campagnolo ErgoPower Rebuild (on bike) | SL1110 | 60 | 1.00 | $99 | Includes removal & replacement; Does NOT include re-taping | |
| Shimano Rapidfire Ressurection | SL1120 | 18 | 0.30 | $30 | May require lever removal from handlebar | ||
| 111 | Shimano STI Ressurection | SL1130 | 45 | 0.75 | $74 | ||
| 166 | HEADSET & FORK | ||||||
| 167 | Adjust Headset | SL1200 | 6 | 0.10 | $10 | ||
| 168 | Overhaul Headset | SL1210 | 27 | 0.45 | $45 | Carbon fiber steer tube: $45 | |
| 169 | Install Headset | SL1220 | 30 | 0.50 | $50 | ||
| Install Cartridge Headset | SL1230 | 45 | 0.75 | $74 | Chris King / Other Cartridge Headsets (facing required) | ||
| 170 | Install Headset In Bare Frame | SL1240 | 15 | 0.25 | $25 | Lubed and ready but adjustment must be done when bike is complete. | |
| 171 | Install Fixed Races Only | SL1250 | 12 | 0.20 | $20 | No lubrication | |
| 172 | Install Crown Race | SL1260 | 6 | 0.10 | $10 | ||
| 173 | Cut Steer Tube | SL1270 | 12 | 0.20 | $20 | Fork alone | |
| Cut Steer Tube Threads | SL1280 | 15 | 0.25 | $25 | per inch; one inch minimum | ||
| 174 | Install Star Nut | SL1290 | 5 | 0.08 | $8 | ||
| 175 | Install Fork | SL1300 | 36 | 0.60 | $59 | Includes Headset Installation, Steer Tube Cutting & Front Brake Adjustment | |
| 175 | Install Fork with Cartridge Bearing Headset | SL1310 | 45 | 0.75 | $74 | Includes Facing Bottom of Stem | |
| 141 | HUBS | ||||||
| 142 | Adjust Front Hub | SL1320 | 6 | 0.10 | $10 | ||
| 143 | Adjust Front Hub and Add Grease to Bearings | SL1330 | 9 | 0.15 | $15 | ||
| 144 | Overhaul Front Hub | SL1340 | 15 | 0.25 | $25 | ||
| 145 | Overhaul Front Hub with Drum Brake | SL1350 | 21 | 0.35 | $35 | ||
| Overhaul Front Dynamo Hub | SL1360 | 30 | 0.50 | $50 | |||
| 146 | Adjust Rear Hub | SL1370 | 12 | 0.20 | $20 | ||
| 147 | Adjust Rear Hub and Add Grease to Bearings | SL1380 | 15 | 0.25 | $25 | ||
| 148 | Overhaul Freewheel Type Rear Hub | SL1390 | 18 | 0.30 | $30 | ||
| 149 | Overhaul Campagnolo Freehub | SL1400 | 36 | 0.60 | $59 | ||
| 150 | Overhaul Shimano Freehub | SL1410 | 21 | 0.35 | $35 | or clone | |
| 151 | Overhaul Cartridge Bearing Freehub | SL1420 | 30 | 0.50 | $50 | Example: American Classic, Hugi, Mavic, White Industries | |
| Machine Cone | SL1430 | 5 | 0.08 | $8 | |||
| 152 | Chris King Ring Drive Lubrication | SL1440 | 15 | 0.25 | $25 | ||
| 153 | Chris King Complete Rear Overhaul | SL1450 | 36 | 0.60 | $59 | ||
| 154 | Overhaul Coaster Brake | SL1460 | 21 | 0.35 | $35 | ||
| 155 | Install Longer Axle in Coaster Brake | SL1470 | 12 | 0.20 | $20 | for Training Wheels | |
| 156 | Overhaul 2-5 Speed Internal Gear Hub | SL1480 | 45 | 0.75 | $74 | minimum price, additional labor for extra grimy or rusty hubs | |
| 156 | Overhaul 7-9 Speed Internal Gear Hub | SL1490 | 60 | 1.00 | $99 | ||
| 156 | Overhaul Alfine 11 Speed Internal Gear Hub | SL1500 | 60 | 1.00 | $99 | ||
| Overhaul Schlumpf 2-Speed Drive | SL1510 | 60 | 1.00 | $99 | |||
| Overhaul SRAM Dual Drive Hub or 3x7 | SL1520 | 45 | 0.75 | $74 | |||
| 156 | Rohloff Overhaul / Seal Replacement | SL1530 | 90 | 1.50 | $149 | Complete "guts" removal and cleaning in kerosene. | |
| 156 | Rohloff Shop Oil Change | SL1540 | 30 | 0.50 | $50 | Pull left shift mechanism, drain, flush with cleaning oil and add fresh oil. | |
| Drill Rohloff Hub Shell for 48 Spoke Lacing | SL1550 | 24 | 0.40 | $40 | |||
| 198 | PEDALS | ||||||
| 199 | Adjust bearing | SL1560 | 6 | 0.10 | $10 | Each | |
| 200 | Overhaul Standard Cup and Cone | SL1570 | 15 | 0.25 | $25 | Each | |
| Overhaul Cartridge Bearing Type | SL1580 | 9 | 0.15 | $15 | Each | ||
| 201 | Purge with Grease | SL1590 | 6 | 0.10 | $10 | Pair | |
| 202 | Install Pedals | SL1600 | 6 | 0.10 | $10 | Pair | |
| 203 | Install Toe Clips | SL1610 | 9 | 0.15 | $15 | Pair, installing pedals extra | |
| Install Power Grips | SL1620 | 12 | 0.20 | $20 | Pair, installing pedals extra | ||
| 205 | SEATS & SEATPOST | ||||||
| 206 | Install Seat | SL1630 | 6 | 0.10 | $10 | Includes one FREE re-adjustment! | |
| Install Metal Seatpost | SL1640 | 6 | 0.10 | $10 | |||
| Install Carbon Fiber Seatpost | SL1650 | 12 | 0.20 | $20 | |||
| 207 | Install Banana Seat | SL1560 | 12 | 0.20 | $20 | ||
| 208 | Remove Frozen Seatpost | Only done per hour, no fixed rate | |||||
| 182 | STEM & HANDLEBAR | ||||||
| 183 | Replace Removable Faceplate Stem | SL1570 | 12 | 0.20 | $20 | (Changing Cables Extra) | |
| Replace Non-Removable Faceplate Stem | SL1580 | 27 | 0.45 | $45 | Includes re-taping bars (Changing Cables Extra) | ||
| 184 | Replace MTB or City Bar | SL1590 | 21 | 0.35 | $35 | (Changing Cables Extra) | |
| Install Stem Riser | SL1600 | 12 | 0.20 | $20 | (Changing Cables Extra) | ||
| 186 | Replace Drop Bar | SL1610 | 36 | 0.60 | $59 | Includes re-taping bars (Changing Cables Extra) | |
| 187 | Install Bar Ends | SL1620 | 8 | 0.13 | $13 | ||
| 188 | Cut Mountian Handle Bars Shorter | SL1630 | 15 | 0.25 | $25 | ||
| 189 | Install Clip-On Aero Bars | SL1640 | 30 | 0.50 | $50 | ||
| 190 | Remove Frozen Stem | SHOP RATE | Only done per hour, no fixed rate | ||||
| 191 | Tape Bars with Vinyl or Cork | SL1650 | 12 | 0.20 | $20 | Stubborn old tape adhesive removal extra. Some leather tape extra labor. | |
| 192 | Tape Bars with Cloth | SL1660 | 30 | 0.50 | $50 | 4 rolls usually required | |
| 193 | Shellac & Hemp Twine Finish Taped Bars | SL1670 | 45 | 0.75 | $74 | Taping not included, 6 coats minimum, takes 3 days | |
| 194 | Tape Aero Bars | SL1680 | 9 | 0.15 | $15 | ||
| 195 | Install Grips | SL1690 | 3 | 0.05 | $5 | ||
| 196 | Install Grab-Ons | SL1700 | 30 | 0.50 | $50 | ||
| 177 | SUSPENSION SERVICE | ||||||
| 178 | Complete Fork Rebuild | SL1710 | 120 | 2.00 | $198 | Off-Bike, Base Price, Headset Overhaul Extra (see shop for quote) | |
| 179 | Fork Oil Change or Lower Leg Service | SL1720 | 36 | 0.60 | $59 | Includes Oil | |
| Pump-up Air Shock (with sag adjustment measurement) | SL1730 | 12 | 0.20 | $20 | |||
| Pump-up Air Shock (no sag adjustment) | SL1740 | 3 | 0.05 | $5 | |||
| Clean and Lube Rear Suspension Frame Pivot | SL1750 | Base Rate = $50 plus $10 per Pivot Bearing over 4* | |||||
| 180 | Rebuild Rear Suspension | SL1760 | Base Rate = $75 plus $10 per Pivot Bearing over 4* | ||||
| * A Pivot Bearing is defined as having a separate shaft (eg. Specialized have pivots on each side of the wheel). Count shock pivots in the total. Derailleur, Brake and Crank removal is extra labor. | |||||||
| 52 | TIRES / TUBES | ||||||
| 53 | Install Tube and/or Tire (on bike QR) | SL1800 | 7 | 0.12 | $12 | ||
| Install Tube and/or Tire (on bike Bolt On) | SL1810 | 9 | 0.15 | $15 | |||
| Install Tube and/or Tire (kids coaster brake bike) | SL1820 | 11 | 0.18 | $18 | |||
| 54 | Install Tube and/or Tire (wheel alone) | SL1830 | 6 | 0.10 | $10 | Alone or with another service that removes the wheels | |
| 55 | Install Rear Tire and/or Tube on Internally Geared Bike | SL1840 | 15 | 0.25 | $25 | ||
| Patch Tube (on bike) | 12 | 0.20 | $20 | All patched tubes are guaranteed not to leak! As good as new, cheaper than a new tube, and it helps save the plant's resources! | |||
| 56 | Patch Tube (wheel alone) | 14 | 0.23 | $23 | |||
| 57 | Boot Tire REAR ONLY! | 15 | 0.25 | $25 | Includes tube and tire removal or replacement, patching tube $5 extra. | ||
| 58 | Drill Rim to fit Schrader Valve | SL1850 | 10 | 0.17 | $17 | Includes tire and tube installation | |
| 59 | Glue On Sew-up | SL1870 | 60 | 1.00 | $99 | Expensive because of the time and toxicity! Do it yourself and save! | |
| 158 | WHEELS | ||||||
| 159 | Install New Front Wheel | SL1900 | 15 | 0.25 | $25 | ||
| 160 | Install New Rear Wheel | SL1910 | 21 | 0.35 | $35 | ||
| 161 | Truing | SL1920 | 6 | 0.10 | $10 | Minimum | |
| 162 | Truing with Broken Spoke{s) at Elbow | SL1930 | 12 | 0.20 | $20 | Disc Brake Rotor adds $5 | |
| 163 | Truing with Broken Spoke{s) at Nipple (requires tire removal) | SL1940 | 15 | 0.25 | $25 | ||
| Spoke Length Calculation | SL1950 | 6 | 0.10 | $10 | Guaranteed correct ONLY if hub and rim are present to measure. | ||
| 164 | Build Wheel | SL1960 | 48 | 0.80 | $79 | Minimum | |
| 164 | Re-use Old Rim | SL1980 | 60 | 1.00 | $99 | ||
| 210 | ACCESSORY INSTALLATION | ||||||
| 211 | Standard Front or Rear Rack | SL2000 | 9 | 0.15 | $15 | complicated racks like Surly cost more | |
| 213 | Front Lowrider Rack | SL2010 | 15 | 0.25 | $25 | ||
| 214 | Full Fenders | SL2020 | 30 | 0.50 | $50 | Standard plastic type (SKS, Planet Bike) CUSTOM MOUNTING EXTRA | |
| 215 | Full Fenders (custom install) | SL2030 | 45 | 0.75 | $74 | Metal (Honjo, Bertoud, Velo Orange) CUSTOM MOUNTING EXTRA | |
| 216 | Clip-On Fenders | SL2040 | 6 | 0.10 | $10 | ||
| 218 | Dynamo Light Set | SL2050 | 36 | 0.60 | $59 | "Generator lights" | |
| 219 | Mirror | SL2060 | 3 | 0.05 | $5 | ||
| 220 | Calibrate & Program Cyclometer | SL2070 | 6 | 0.10 | $10 | with battery replacement | |
| 221 | Cyclometer | SL2080 | 12 | 0.20 | $20 | includes calibration | |
| 222 | Cyclometer with Cadence Mount | SL2090 | 27 | 0.45 | $45 | includes calibration | |
| 223 | Kickstand | SL2100 | 6 | 0.10 | $10 | ||
| 225 | Baby Seat | SL2110 | 12 | 0.20 | $20 | Removal - We don't install | |
| 226 | Basket | SL2120 | 9 | 0.15 | $15 | ||
| 227 | Training Wheels | SL2220 | 12 | 0.20 | $20 | Assumes no axle changes - bolt on | |
| Adult Training wheels | SL2220 | 30 | 0.50 | $50 | Assumes no axle changes - bolt on | ||
| 228 | Trunk Mount Car Rack | SL2230 | 6 | 0.10 | $10 | ||
| 229 | Hitch Mount Car Rack | SL2240 | 12 | 0.20 | $20 | ||
| 230 | Install Water Bottle Riv-Nuts [no welding) | SL2250 | 12 | 0.20 | $20 | per Set | |
| 232 | FRAME ALIGNMENT | ||||||
| 233 | Rust-Proof Inside of Steel Frame & Fork | SL3000 | 9 | 0.15 | $15 | Boeshield T-9 | |
| 233 | Straighten Bent Stay | SL3010 | 18 | 0.30 | $30 | ||
| 234 | Align Dropouts | SL3020 | 6 | 0.10 | $10 | per pair | |
| 235 | Align Rear Derailleur Hanger | SL3030 | 12 | 0.20 | $20 | ||
| 236 | Align Fork | SL3040 | 27 | 0.45 | $45 | ||
| Align Front Triangle | SL3050 | 27 | 0.45 | $45 | Push-Out Headtube from Head-on Collision | ||
| 237 | Align Rear Triangle | SL3060 | 24 | 0.40 | $40 | ||
| 238 | Full Frame Alignment | Only done as a per hour process | |||||
| 240 | MACHINING | ||||||
| 241 | Face Stem | SL4000 | 9 | 0.15 | $15 | A must for Chis King headsets! | |
| 242 | Face Head Tube | SL4010 | 27 | 0.45 | $45 | ||
| Chamfer Bottom Bracket | SL4020 | 27 | 0.45 | $45 | |||
| 243 | Face Bottom Bracket | SL4030 | 27 | 0.45 | $45 | ||
| 245 | Cut Crown Race Seat | SL4040 | 15 | 0.25 | $25 | ||
| 246 | Chase Steer Tube Threads (French or English) | SL4050 | 12 | 0.20 | $20 | ||
| 247 | Cut Steer Tube Threads | SL4060 | 15 | 0.25 | $25 | per inch; one inch minimum | |
| 248 | Ream Seat Tube | SL4070 | 21 | 0.35 | $35 | Includes hone finish | |
| 249 | Hone Seat Tube | SL4080 | 9 | 0.15 | $15 | ||
| Ream & Tap English Threads to Italian | SL4090 | 30 | 0.50 | $50 | per side, repairs stripped bottom brackets | ||
| Tap French to English Threads | SL4100 | 30 | 0.50 | $50 | both sides | ||
| Chase English Bottom Bracket Threads | SL4110 | 15 | 0.25 | $25 | both sides | ||
| 244 | Chase French or Italian Bottom Bracket Threads | SL4130 | 21 | 0.35 | $35 | both sides | |
| EBIKEs | |||||||
| EBIKES WITH BROKEN BATTERY CASINGS WILL NOT BE ACCEPTED FOR REPAIR, THESE WILL ACCEPTED FOR DISPOSAL ONLY | |||||||
| Basic Diagnoses | SL4500 | 9 | 0.15 | $37 | |||
| Battery Load Testing | SL4501 | 31 | 0.52 | $102 | Requires 2-3 days for charge up/down cycles | ||
| Controller Testing | SL4502 | 10 | 0.17 | $25 | Assumes compatable controller in stock | ||
| Battery Disposal | SL4503 | 25 | 0.42 | $35 | |||
| Controller upgrade/update | SL4504 | 20 | 0.33 | $20 | Assuess programming dongle and software in stock without license | ||
| Connector Repair | SL4505 | 30 | 0.50 | $40 | Labor + Parts extra per inventory | ||
| Key Removal / Replace ment | SL4506 | 120 | 2.00 | $248 | Labor for dril out and replace ebike battery locks does not include parts |
4101 East Park Blvd #138
Plano Texas 75094
+1 214-556-0997
